Design seat with double gel pads for increased comfort for driver and passenger on long distance trips. Seat height is same as standard. With strap for passenger.Can not be combined with seatcover 999940342-xxx
A stylish seat for the shorter rider.The 35mm lower seat allows the rider to reach the ground better.Replaces the original seat.
This low seat is slimmer which makes it easier to touch the ground whilst standing still.For the MY17-MY19 Z1000SX it is 8 mm lower then the original seat.For the MY20-> Ninja 1000SX it is 28 mm lower then the original seat.
ERGO-FIT™ low front seat that is 15mm lower than the original seat. It will give an easy reach to the ground. (Total seat height with this seat is 820mm) Ninja H2 SX (ZX1000A. / ZXT02A.) for Europe is equipped with high seat (835mm height) Optional accesory front seat has partnumber 999941065 Ninja H2 SX SE (ZX1000B. / ZXT02B.) for Europe is equipped with high seat (835mm height) Optional accesory front seat has partnumber 999941066
Comfortable touring gel seat for increased comfort. With Z1000SX logo.
The Gel insert evens out seating pressure, "floating" the rider's weight over a larger surface area. Synthetic leather cover is weatherproof. Simple installation using stock seat latch and rubber cushions.
Durable powder coated steel luggage rack that mounts to your passenger packrest. Length = 20cm, width = 23cm (L=8", W=9”)(Anthracite/Black)(Requires passenger backrest and bracket Kit. Sold separately)Passenger luggage rack kit consists of 3 components1- KQR™ Bracket Kit2- KQR™ Backrest with lock3- Luggage rack
Design seat with double gel pads for increased comfort for driver and passenger on long distance trips. Seat height is same as standard.With Bagster logo on the rear side.
Made to fit and complement the Z900 motorcycle, this seat enhances riding comfort for taller passengers. This ERGO-FIT® Extended Reach Passenger Seat is 10mm higher than the standard passenger seat.
ERGO-FIT™ 2-Color stitched low front seat that is 15mm lower than the original seat. It will give an easy reach to the ground. (Total seat height with this seat is 820mm) Ninja H2 SX SE (ZX1000B. / ZXT02B.) for Europe is equipped with high seat (835mm height) Optional accesory front low seat has partnumber 999941066
A stylish ERGO-FIT(tm) seat for the smaller rider. Will degrease hight by 25 mm from 815 mm to 790 mm. Replaces the original seat.
A stylish ERGO-FIT(tm) seat for the taller rider. An extra 20 mm of padding produces extra leg room. Replaces the original seat.
Gel insert evens out seating pressure, "floating" the rider's and passenger's weight over a larger surface area.
The Gel insert evens out seating pressure, "floating" the pasenger's weight over a larger surface area. Synthetic leather cover is weatherproof. Simple installation using stock seat latch and rubber cushions.
This touring seat features a 10mm low-rebound urethane layer in the rider area of the seat, offering increased cushion comfort for the rider.In addition, the pillion seat area is longer, wider and flatter, providing additional position adjustment options to the passenger.
Strong chrome steel backrest supports. comes with all required installation hardware. Order studded pad (39156-0118-MA) or plain pad (39156-0187-MA) separately.
Compared to the standard seat the lower seat is 25mm lower and 20mm narrower. GEL seat for even more comfort and relaxed cruising. Absorbs vibrations and improves weight distribution.
A stylish ERGO-FIT™ seat for the taller rider. An extra 25mm of padding produces extra legroom. Replaces the original seat base.
Comfortable Easy-Reach seat that brings the rider ± 53mm closer to the handlebar. Additionally, the slimmer seat profile allows the rider to reach the ground better.
The position of the pegs can be horizontally adjusted over 4 positions while the height can be adjusted steplessly. Made by LSL.
Brushed aluminum finish with rubber foot cushions for maximum passenger comfort. Styling matches the original driver floorboards.
The position of the pegs can be horizontally and vertycally adjusted. Made by LSL. For racing use.
Scratch resistant screen designed to reduce wind pressure and to improve aerodynamics.
Windshield Large (Quick Release)This 3 part Kawasaki Quick Release (KQR™) windshield kit with lock allows for easy installation or removal of windshield once installed.KQR™ Fork windshield bracket kit with durable chrome finish. This windshield mounting system can be fitted to the front fork without removing fork legs. The stainless steel windshield bracket with lock and keys is a required component to mount KQR™ windshields. Anthracite/Black finish. Windshield large (Height = 54cm, width = 45cm. Effective = 43cm. See image) Complete windshield kit consists of 3 components: 1- Fork bracket2- Lockable windshield bracket3- Windshield
Standard shape double bubble smoke windshield for protection and improved looks. With EU type approval.Kawasaki logo sticker for windscreen available separetely. (80x14mm)
Adjustable scratch resistant screen designed to reduce wind pressure and to improve aerodynamics.
Scratch resistant screen designed to reduce wind pressure and to improve aerodynamics.
Scratch resistant screen designed to reduce wind pressure and to improve aerodynamics.
Scratch resistant screen designed to reduce wind pressure and to improve aerodynamics.
Scratch resistant spoiler screen designed to reduce wind pressure and to improve aerodynamics.
Designed to provide additional rider comfort.This screen is approximately 20 mm higher and 40 mm wider than standard.Kawasaki branded product, produced and developed by Kawasaki and fully road legal.
Higher windshield for improved protection of body and hands.Scratch resistant clear PMMA Anti-shock material. Special Kawasaki design. (Non-Kawasaki branded product, specially developed and fully road legal) (17cm higher, 9+9cm wider)
Scratch resistant screen designed to reduce wind pressure and to improve aerodynamics.
Classic touring style windshield for improved riding comfort and weather protection. Height=45cm, Width=52cm.
Scratch resistant screen designed to reduce wind pressure and to improve aerodynamics.
Scratch resistant screen designed to reduce wind pressure and to improve aerodynamics. With specially designed openings to prevent turbulence behind the windshield.
Clear 4,5 mm thick anti scratch coated polycarbonate shield. Easily to install to the fork tubes. Measurements: Height 574 mm and Width 482 mm.
6mm quantum coated polycarbonate (highly scratch resistant). Mirror quality polished chrome brackets. Exclusively designed by the Kawasaki Design Department.
.jpg)
Scratch-resistant windscreen, designed to provide additional rider comfort, in smoke color. This screen is approximately 45mm higher and 60mm wider than standard.
Cafe style deflector for additional wind protection.2 Partnumbers are required:1- Fork bracket (Black)2- Cafe deflector with bracket (Black)
This sporty and lightweight slip-on system with butterfly valve offers great performance. The muffler outer sleeve is made of carbon-fibre.
Give your Kawasaki bike a more sporty look and sound with this short Akrapovic slip-on system. This lightweight slip-on system offers great performance.Heatshield 258EXP0058 sold separately is recommended with this item.Please be aware:258EXP0057B is Euro 4 spec. This version has the Akrapovic logo engraved.258EXP0057A is Euro 3 spec. This version has the Akrapovic sticker.
Akrapovic full exhaust system with catalyst and titanium muffler. This system is around 2kg lighter compared to the stock exhaust system and gives a pure sporty sound. A combination of racing materials like titanium for the muffler outer sleeve and carbon fibre end cap give this exhaust system a racing touch. Laser marked logo. This homologated exhaust system is compliant with EU regulations and has EC/ECE type-approval.
Give your Kawasaki a more sporty look with the short dual Akrapovic slip-on system. This lightweight slip-on system offers great performance.
Give your Kawasaki bike a more sporty look and sound with this short Akrapovic slip-on system. This lightweight slip-on system offers great performance.
Stainless steel tapered double exhaust system with catalyst. 3.8 kg lighter than original exhaust. Same as used on the W800 'Gentlemen cup' bikes. Sporty looks and sound. Available chromed or matt black. *Non Kawasaki branded product, fully road legal.
Give your Kawasaki a more sporty look with the short dual Akrapovic slip-on system. This lightweight (-4kg) slip-on system offers great performance. (Designed to be used together with pannier system)For model year 2017- the following partnumber is manditory:258EXP0073A
Arrow matt black exhaust system for Vulcan S. Full system made of stainless steel with catalyst and carbon endcap. This system is lighter compared to the stock exhaust system and gives a deep sporty sound. This exhaust system is homologated according to Euro4 regulations (emissions and noise) and has ECE type-approval.
Give your bike a sporty look and sound with this stylish exhaust.Race proven materials and end cap made of carbon fibre. Includes carbon heat shield. This slip-on system is 2kg lighter than the standard system.
Evolution line complete system with titanium headers and carbon hexagonal muffler. This system provides a significant increase of both power and torque, across the whole RPM band, accompanied by great weight reduction as well.
Includes carbon bracket to replace original aluminium footrest mounting.
Should only be used in combination with fuel injection tuning to prevent engine damage and achieve maximum performance.
(Not for street use)
Give your Kawasaki bike a more sporty look and sound with this Akrapovič slip-on system. EC/ECE type approved and fully road legal. This lightweight system offers great performance and resembles the exhaust used on the WSBK Ninja ZX-10RR.
High quality, impact resistant polycarbonate/ABS material. Coated with UV resistant PU paint. Designed by Kawasaki Design Department.
Enhance the sporting appearance of your bike with a colour coded pillion seat cover. All factory standard colours are available for this item which replaces the passenger seat.
Stylish 3-piece set of covers, to accentuate the jagged-edge design of the bike's crankcase, clutch and alternator covers.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Replaces the passenger seat.
Eye catching, body coloured, inner fender designed to look good and protect the rear of the machine from road spray. UV resistant high polish paint finish.
High quality, impact resistant polycarbonate/ABS material. Coated with UV resistant PU paint. Designed by Kawasaki Design Department.
Adhesive wheel stickers with Kawasaki logo. Designed for the horizontal part of the rim. Kit contains stickers for 1 bike. (Not needed for Ninja H2 SX SE (ZX1002B. / ZXT02B.) as this bike is standard equipped with wheel rim tapes.)
Stylish wheel rim tape to complete the look of your bike. (Set of 4 rings for 1 bike)
These clip-on sport handlebars offer a more forward-leaning seating position. 5-degree angle. Made by LSL.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Covers the rear section of the seat and replaces the handgrip. Can not be used in conjunction with a top case and top case bracket.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Replaces the passenger seat.
Stainless steel radiator guard for design or protecion. Mesh in chrome.Kawasaki branded product.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Not to be used in conjunction with a top case and top case bracket. Replaces the passenger seat.
Stylish wheel rim tape to complete the sporty looks of your bike. (Set of four rings for one bike)
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Not to be used in conjunction with a top case and top case bracket. Replaces the passenger seat.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Not to be used in conjunction with a top case and top case bracket. Replaces the passenger seat.
Stylish seatcover to enhance the sporting appearance of the bike. Includes rubber pad. Almost all factory standard colours available.Replaces the passenger seat.
High quality, impact resistant polycarbonate/ABS material. Coated with UV resistant PU paint. Designed by Kawasaki Design Department.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Replaces the passenger seat.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Covers the rear section of the seat and replaces the handgrip. Can not be used in conjunction with a top case and top case bracket.
Pure visual styling to enhance the sporty appearance of the bike. All factory colours available.
Decorative carbonlook stickers made of high quality UV- and chemical resistant material. Covers: Headlight cowling, Front fender, Side covers, and Tail piece.
Aluminium alloy radiator trim for design and protection.Black powder-coated with lasercut pattern. Mesh in either silver or black (black mesh shown).
Sticker kit to make your own 2013 World Superbike replica. Tom Sykes or Loris Baz included in one kit. The stickers are made of a high quality, UV- and chemical resistant, and easy to fit material.(Non Kawasaki branded product, produced and developed by Uniracing)
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Replaces the passenger seat.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Replaces the passenger seat. Can not be used in conjunction with a top case and top case bracket.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Replaces the passenger seat.
Stylish seatcover to enhance the sporting appearance of the bike. Includes rubber pad. All factory standard colours available. Replaces the passenger seat.
Enhances the sporting appearance of the bike. All factory standard colours available. Includes rubber pad with Ninja logo. Replaces the passenger seat.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Not to be used in conjunction with a top case and top case bracket. Replaces the passenger seat.
Stylish seatcover to enhance the sporting appearance of the bike. Includes rubber pad. All factory standard colours available. Replaces the passenger seat.
Stylish 3-piece set of covers, to accentuate the jagged-edge design of the bike's Clutch and Crankcase Covers.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Not to be used in conjunction with a top case and top case bracket. Replaces the passenger seat.
Stylish seatcover to enhance the sporting appearance of the bike. Includes rubber pad. Almost all factory standard colours available. Replaces the passenger seat.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Not to be used in conjunction with a top case and top case bracket. Covers the rear section of the seat.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Replaces the passenger seat.
Pure visual styling to enhance the sporting appearance of the bike. All factory standard colours available. Replaces the passenger seat.
Stylish seat cover to enhance the sporting appearance of the bike. Includes rubber pad. Available in almost all factory standard colours. Replaces the passenger seat of the Ninja ZX-10R.
Marchesini lightweight front wheel kit.
Contains:
This tinted, race style smoke windscreen is designed to reduce wind pressure and improve aerodynamics. Homologated with bike type approval.
Rigid tubular steel bracket with black powder-coating. Features relocated indicators and additional rear/stop light. Lockable pannier cases with 2 x 35 litre capacity. Will fit most full face helmets. Pannier cover set in body colour to be ordered separately. Topcase and Panniers can not be combined.Pannier system consists of 3 partnumbers: 1- Pannier bracket 2- Pannier case set 3- Pannier cover set (Color)
Colour matched top shell cover. To be used in conjunction with the 39L top case (part number 232LUU0007)
Top case (30 litres,3.0 kg max) offers enhanced carrying capacity, while maintaining the bikes slim figure.Topcase cover to match motorcycle colour needs to be ordered separately.This accessory is fitted as standard on the Urban edition.
Durable black tubular steel rear carrier with aluminum center. Provides 3.0Kg (6.5 pound) cargo capacity. Rack dimensions approximately 25X25CM (10"x10") Includes four welded bungee hooks for safe attachment of luggage.
Increase the luggage capacity of your motorcycle with 39 liters with this optional top case. Exclusive Kawasaki design. Colour matched cover to be ordered separately.
Top case providing a spacious 47 litres of storage space. Will fit two of most full face helmets. Matching cover in bike color to be ordered separately, as well as the anodized aluminium deco plate.This system features the One-Key System, so you can conveniently open the topcase using your ignition key.Requires 5 parts:1- Topcase 47L2- Carrier Plate3- Topcase Cover (in bike color)4- Aluminium Deco Plate (Silver or Black anodized)5- Lock Cylinder-Interoir bag available separately. See picture.Part number: 999940497-Bag rest available separately.Part number : 999940494
Top case providing a maximum 47 litres of storage space. Will fit most full face helmets (two helmets). Includes baseplate. Matching cover in bike color to be ordered separately. (Non Kawasaki branded product).(Topcase cannot be used in combination with panniers) Requires 3 parts:1- Topcase 47L2- Topcase bracket3- Colored cover
Alloy topcase bracket with shock-absorbing double baseplate. Bracket incorporates passenger hand grips. Topcase (39L) with exclusive Kawasaki design. Colour matched cover to be ordered separately. (Topcase cannot be used in combination with panniers)4 Partnumbers are required:1- Topcase bracket2- Baseplate3- Topcase4- Colored cover
High quality materials, all visible parts mirror quality chrome finish. (Max load 3kg / 6.6lb)Requires optional backrest 005SBC0001 to be fitted.
Rigid, water resistant bag with compartments for business equipment and shoulder straps. (Designed for the 47-Litre topcase)
Colour matched top shell cover, specifically designed for the Kawasaki 47 Litre topcase.
Rugged, water-resistant nylon construction with reinforced foam body and lid. Mounts to rear seat easily with hook-and-loop straps that are removable only by key release of seat. Expandable feature adds 7cm (3") of vertical storage capacity (6-8 liters). Reflective piping for night visibility. Logo on lid.
Top quality leather and workmanship. HDPE liner and formed backpanel keep saddlebags in perfect shape. Approx 2x15 litres. Dimensions: LxHxD 50x25x20cm.
30 litre capacity will fit most helmets. Includes base plate. Cover to match motorcycle colour to be ordered separately.
This chrome saddlebag support allows mounting of Kawasaki Genuine Accessory bracket and saddlebags without the 99994-0161 Backrest Kit.
Once attached to the topcase provides additional comfort for the pillion passenger.
Semi-soft saddlebag set made from high quality Nylon material with reflective details. Removable quick-lock stays hold the saddlebags securely in place.Volume per side 14 liters, expandable to 21. Includes rain covers.Requires both the bracket and the bags set.
Factory-approved 50L lockable topcase with LED taillight that can hold two full face helmets. Wrap-around passenger backrest provides back and arm support. Replaces the stock passenger backrest and includes all required chrome covers, hardware and wiring.
Lockable Monokey pannier cases with 2 x 35 litre capacity. Will fit most full face helmets. With Kawasaki logo. Covers in body colour to be ordered separately.
Top loading, black leather. Approximate capacity of 23-litres each side. Type: Buckle Dimensions: L-36cm x H-29cm x D-17cm.
Quick release 56 litre pannier system that will hold most full-face helmets. Panniers attach to design handgrips and footrest and give a clean sporty look when removed. Bike ignition key also fits pannier locks. Narrow mounting width of just 92.5cm.(Can not be combined with topcase)System consists of 5 partnumbers:1- Pannier Set2- Pannier Cover Set (Color)3- Deco Stripe Kit (Color)4- Lock Cylinder Set5- Bag fitting kitFor MY16 and ealier is also required:6- HandgripsOptional:7- Inner bag set
Grab and go! The interior bags keep everything in place. Rigid, water resistant bag set with compartments for business equipment in one of the bags and shoulder straps.
Colour matched top shell cover, special Kawasaki design. To be used in conjunction with the 30L top case. (Part number 232LUU0008)
Once attached to the topcase provides additional comfort for the pillion passenger.(Dimensions: ± 29 x 13 x 6 cm)
Top case with 47 litres of storage space. Will fit most full face helmets (two helmets). Exclusive Kawasaki design.Must be combined with topcase carrier. Colour matched cover to be ordered separately.(Can not be combined with seatcover)System consists of 3 partnumbers:1- Topcase bracket2- Top case 47L including Baseplate3- Matching cover (Color ...)
Rigid, seamless drawn precision tubular steel with black powder-coating. Bracket incorporates passenger hand grips.
Rugged, water-resistant polyester construction with reinforced body and reflective stripes. Mounts to bike easily with hook and click-on straps. Including shoulder strap and rain cover. (Non-Kawasaki branded product)(L=33cm, W=20cm, H=28cm, 18-Litre)
Grab and go! The interior bags keep everything in place. Rigid, water resistant bag set with compartments for business equipment in one of the bags and shoulder straps. Features Kawasaki logo.
Rigid, seamless drawn tubular steel bracket with black powder-coating. Bracket incorporates passenger hand grips. Top case cannot be used in combination with panniers.
Lockable Monokey pannier cases with 2 x 35 litre capacity. Will fit most full face helmets. With Kawasaki logo. Covers in body colour to be ordered separately.
Colour matched top shell cover, special Kawasaki design. To be used in conjunction with the 30L top case. (Part number case 232LUU0008)
Once attached to the topcase provides additional comfort for the pillion passenger.
These nylon interior bag set (2 bags) keep everything in place. They facilitate carrying luggage to and from the pannier cases. With closable mesh separator, handles and carrying strap. (L=30-35, H=30, W=20cm)
Colour matched top shell cover. To be used in conjunction with the 39L top case.
Semi-soft saddlebag set made from high quality Nylon material with reflective details. Removable quick-lock stays hold the saddlebags securely in place.Volume per side 14 liters, expandable to 21. Includes rain covers.Requires both the bracket and the bags set.
Top case with 39 litres of storage space. Will fit full face helmet. Exclusive Kawasaki design. Must be combined with topcase carrier and baseplate. Colour matched cover to be ordered separately.System consists of 4 components:1- Carrier bracket2- Baseplate3- Topcase 39 Litre4- Cover (color)
Durable steel construction, required to mount saddlebags. Requires backrest kit (99994-0161) or adapter kit (K99994-0171A) sold separately.
Alloy topcase bracket with shock-absorbing double baseplate. Bracket incorporates passenger hand grips. Topcase cannot be used in combination with panniers.
Top case providing a maximum 47 litres of storage space. Will fit most full face helmets (two helmets). Exclusive Kawasaki design to match the style of the motorcycle. Colour matched cover to be ordered separately.
Quick-release 56 litre pannier system that will hold most full-face helmets. Panniers attach to the factory handgrips and give a clean look when removed. Features our One-Key System: the bike ignition key also fits the pannier locks.System consists of 5 partnumbers:1- Pannier Set2- Pannier Fitting Kit3- Pannier Cover Set (Color)4- Deco Stripe Kit (Color)5- Lock Cylinder SetOptional items:Pannier Protection Foil - to protect the colored panels from scratches and scuffmarksPannier Inner Bags - for convenience especially during multi-day tours
Topcase with 30 litre capacity will fit most helmets. Includes base plate. Metal carrier and cover to match motorcycle colour to be ordered separately.
Semi rigid Nylon tank bag specially designed for the fuel tank shape.Black/Grey tank bag with reflective piping and Kawasaki logo.Clear Pocket at top of tank bag with hole for earphone from smartphone or navigation.Inside has partitions to prevent goods moving around.Including shoulder belt and rain cover with transparent window.L350mm, W223mm,H150mm, Load Weight Max 2kg, Load Capacity approximate 4 Litre.A matching bracket is required for fitment.
Help keep your hands warm on the road with a grip heater system ergonomically designed to minimize added bulk to the grip.
Stylish grip heater with all around heating and integrated control button with light in the grip itself. There is an automatic battery saver function. If the battery voltage drops while using the grip heater, the grip heater turns off and the indicator light blinks. The grips feature 3 temperature levels (100%, 60%, 20%, Off).
High quality gel-resin self-adhesive heel guards. Protects the footrest heel section from scratches. (Transparent)
Tankpads (side). Top quality gel-resin self-adhesive tank protector. Semi transparent allowing the original tank colour to show through.
These protective front axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.
Top quality gel-resin self-adhesive tank protector. 1-part shape featuring the Kawasaki model logo, semi-transparent allowing the original tank colour to show through.
The resin handguards are equipped with an aluminum bar for the strongest protection available.(Bracket kit and shell set to be purchased separately)
Top quality gel-resin self-adhesive tank protector. 3-part shape featuring the Ninja or Ninja 300 logo, semi-transparent allowing the original tank colour to show through.
Add even more protection with front axle sliders. These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.
Scratch resistant film for your digital dashboard. Will protect the screen against scratches.
Protect yourself from the elements with this waterproof polyester apron. Strengthened for motorway stablity and tailor made for the J300. Magnetic trap door for access to storage tray and ignition key. Reflective pipings for good visibility. Expandable seat cover to keep seat dry and clean when parked. (Non-Kawasaki branded product)
These handlebar gloves keep your hands warmth and comfortable. Thick material with reflective mark and fleece lining. Watertightness bib to fold and close the muff. Easy and quick to install thanks to the standard plastic over handles. (Non-Kawasaki branded product, produced and developed by Holding Trophy for Kawasaki and fully road legal)
Hand guards with an aluminum bar for the strongest protection available. With plastic shells. Bracket kit and shell set to be purchased separately. (Non Kawasaki branded product, produced and developed by SW-Motech, fully road legal.)
Top quality gel-resin self-adhesive tank protector, featuring the bike logo. Graphic is semi-transparent, allowing the original tank colour to show through.Set of Tankpad + Kneepads
Tankpads (side). Top quality gel-resin self-adhesive tank protector. Semi transparent allowing the original tank colour to show through.
Side protection dampers, manufactured from high density material, metal bracket, Kawasaki logo.
Tankpads (side). Top quality gel-resin self-adhesive tank protector. Semi transparent allowing the original tank colour to show through.
Thick foam cover for stock handlebar cross bar Handlebar pad features the KLX logo
Side protection dampers, manufactured from high density material with metal bracket and Kawasaki logo. (Fairing may need to be cut for required clearance.)
Scratch resistant film for your digital dashboard. Will protect the screen against scratches.
Sturdy side protection dampers, manufactured from high density material, ABS metal subframe and bracket, engraved Kawasaki Logo.
Frame Slider Sets are black molded nylon sliders on metal mounting brackets and feature the Kawasaki logo.
Sturdy side protection dampers, manufactured from heavy duty polymer and metal bracket.
Add even more protection with front axle sliders. These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.This product helps to protect your motorcycle, but will not prevent all types of damage.
Sturdy side protection dampers, manufactured from heavy duty polymer and metal bracket.
Top quality gel-resin self-adhesive tank protector. Unique new 3-part shape featuring the 1400GTR logo. Semi-transparent allowing the tank colour to show through.
Top quality gel-resin self-adhesive tank protector.Semi-transparent with Z750R model logo.
Top quality gel-resin self-adhesive tank protector set with Z750 model logo. Semi-transparent allowing the original tank colour to show through.
Top quality gel-resin self-adhesive tank protector. Semi transparent allowing the original tank colour to show through.
Top quality gel-resin self-adhesive tank protector including a key fob guard. Semi-transparent allowing the tank colour to show through.
Add even more protection with front axle sliders. These axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.This product helps to protect your motorcycle, but will not prevent all types of damage.
Hand guard shell set made of black rugged plastic. All hardware and instructions included.
Screen protector for your digital dashboard. Will protect the screen against scratches.
Frame protection side covers made of durable black ABS plastic. Helps provide scuff protection for the chassis side rails in the area of the rider's boots. All hardware and instructions included.
Kawasaki engine sliders that are easy to mount and give extra protection for the bike. Can be fitted without drilling the cowling.
Soft polypropylene motorcycle cover, to protect your motorcycle from dust and other small particles. The breathable membrane allows the continuous circulation of air.
Features a belly strap as well as an elastic band to ensure the cover stays in place.
Tailor made durable black ABS plastic skid plate. Provides full coverage protection of the chassis bottom rails and sump. Includes oil drain hole to allow oil to be changed without removing skid plate.
Tankpads (side). Top quality gel-resin self-adhesive tank protector. Semi transparent allowing the original tank colour to show through.
Frame Slider Sets are black molded nylon sliders on metal mounting brackets and feature the Kawasaki logo.
Help protect your vehicle’s bodywork with sturdy Kawasaki branded Frame Sliders.
These protective front axle sliders help to prevent damage to your front axle, front axle nut, fork bottoms, and brake calipers.
Scratch resistant film for your digital dashboard. Will protect the screen against scratches.
Scratch resistant film for your digital dashboard. Will protect the screen against scratches.
Rear shock absorber TTX36 with adjustable compression and rebound damping, adjustable length and integrated hydraulic spring preload adjuster. Separated functions for compression and rebound.
Front fork cartridge kit with externally adjustable compression, rebound damping and external spring preload adjuster.(Excluding springs)
Fully adjustable (6 positions) clutch and brake lever set. Made by LSL. Approved for street use. (KBA 91104)
These adjustable sport handlebars offer a more forward-leaning seating position. Made by LSL.
Front fork cartridge kit with externally adjustable compression, rebound damping and external spring preload adjuster.(Excluding springs)
Rear shock absorber TTX36 with adjustable compression and rebound damping, adjustable length and integrated hydraulic spring preload adjuster.
Öhlins FGRT-series Road & Track high quality racing front fork legs. Spring preload adjuster: 2-12 mm (0-10 turns), Rebound damping adjuster: 20 clicks, Compression damping adjuster: 25 clicks. Stroke: 120 mm with possibility to lenghten to 130 mm. Includes springs with 10.0N/mm rate.
The position of the pegs can be horizontally adjusted over 4 positions while the height can be adjusted steplessly. Made by LSL.
A direct replacement for the stock steering damper. Provides adjustable levels of damping through 20 click dial. Oil in the damper is pre-pressurized to avoid free play.
Lightweight footrest set. The position of the pegs can be horizontally (4 positions) and vertically adjusted. Made by LSL.Brake line kit 254BLP0003 is required for ABS models.
FGK 142, front fork cartridge kit with externally adjustable compression, rebound damping and external spring preload adjuster.
Enhances performance and style. Hydro formed header tubes to ensure the the optimal tube shape for the engine's exhaust gas flow. Stainless steel headers and a titanium muffler. Should be used in combination with fuel injection tuning. Saves 7.51 kg over the standard system.The optional carbon racing bracket set should be ordered separately if you wish to remove the factory footrests. Racing part, not for street use.
A direct replacement for the stock steering damper. Provides adjustable levels of damping through 20 click dial. Oil in the damper is pre-pressurized to avoid free play.
This lightweight adjuster replaces the original rings and allows adjustments the preload very quickly.It uses the complete thread of the rear shock absorber.
Rear shock absorber TTX36 with adjustable compression and rebound damping, adjustable length and integrated hydraulic spring preload adjuster.
Tire warmer sets similar to the ones used by the KRT superbike team. Tire warmers with carbon-fibre heating technology. This gives fast heating of tire and rim without local overheating and a constant temperature. The sides of the tire warmer reach far over the rim flange keep the heat inside. This way the pressure of the tyre is stabilized. A high precision thermostat ensures a target temperature of 80-85 °C.
At an ambient temperature of 20 °C, it takes approx. 35 minutes to reach a tyre temperature of 80-85 °C and a rim temperature of approx. 40°C.
The tire warmers are equipped with a red indicator LED to indicate the active heating mode. Sidewalls made of high quality heat-resistant ‘NOMEX for optimum reliability. A central velcro flap and elastics integrated at the side enable easy and fast assembly and disassembly.
Connection is 1.8 m power cable, with Euro plug.
Suitable for front 120-17" and rear 195-200-17" tires.
Lightweight racing axle protector kit with black anodized aluminium pads. (Axle not shown)
Tyre warmer set "Advanced" Fitted with a high-precision thermo switch, this instrument informs you when the temperature (80°C) is reached and will keep it within a range of +- 2°C.Heating part is made of a carbon resistor covered with thermo conductive silicon. Material in contact with the tyre is anti-adherent, anti-cut and anti-abrasion. External surface is washable.
Tire warmer sets similar to the ones used by the KRT superbike team. Tire warmers with carbon-fibre heating technology. This gives fast heating of tire and rim without local overheating and a constant temperature. The sides of the tire warmer reach far over the rim flange keep the heat inside. This way the pressure of the tyre is stabilized. A high precision thermostat ensures a target temperature of 80-85 °C.
At an ambient temperature of 20 °C, it takes approx. 35 minutes to reach a tyre temperature of 80-85 °C and a rim temperature of approx. 40°C.
The tire warmers are equipped with a red indicator LED to indicate the active heating mode. Sidewalls made of high quality heat-resistant ‘NOMEX for optimum reliability. A central velcro flap and elastics integrated at the side enable easy and fast assembly and disassembly.
Connection is 1.8 m power cable, with Euro plug.
Suitable for front 120-17" and rear 195-200-17" tires.
Original Kawasaki chrome chain guard. (3x washer and 3x bolt needed for fitment)
Great looks without compromising comfort or grip. Chrome-plated housing with integrated rubber liner and ribs.
Triple chrome plated engine guards made from oversized 35mm steel tubing. 2005/2006 models require additional bracket K11053-1745A.*The engine guards help to protect your motorcycle, but will not prevent all types of damage.
Covers the brake hose banjo and bolt. Made from high-quality triple chrome-plated billet aluminum. Fits all 12mm banjos.
Chrome finish trim parts to change the style of the Vulcan S.1- Cover for muffler body (Heat shield) 999940578 2- Cover for muffler (Rear ring) 999940579 3- Clutch Cover Plate (Mark, clutch plating) 999940580
Bright polished chrome speedo visor. Easy installation with adhesive bond tape. Reduces reflections and enhances the styling of your cruiser.
Developed in conjuction wih SP Connect the kit consists of a Clutch Mount, Anti-vibration module and a Universal Phone Clamp. Suits mosts mobile phones; Simply pull out the crown, screw it tight, and then push the crown back in to lock your phone in place. While remaining fully operable, your phone can now be attached to or detached from the mount in seconds.
An essential tool for motorcycle enthusiasts and mechanics alike. Designed to provide stability and convenience, this paddock stand allows easy access to the wheels, suspension, and other components.
This premium rear bike stand can be disassembled, making transportation a lot easier. The compact bike stand comes in a shop worthy carrying case with a built-in carrying handle. The stand is made of premium steel and has a green and black finish. The Kawasaki logo is laser cut in steel.
Optional are the forks to suit your preference;
Front stand for models with radial front brake calipers.
Mounting points for paddock stand, providing stability during maintenance or storage. The bobbins are securely attached to the motorcycle's swingarm, allowing for easy and safe lifting of the bike.
Whether you want to park your bike in a pitbox or in your garage, let your precious machine rest in style on this Kawasaki Garage Mat. The mat meets new FIM environmental codes and offers a high level of absorption and dust-control features.
Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celcius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
Fits:
Made from strong Anti-tear Honeycomb ripstop fabric. Heat resistance till 120 degrees Celsius. Subtle branding.
100% Polyester. With multi usable (back)packing string bag.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)
Strong durable multi layered fabric with taped seams. Heat resistant honeycomb till 120 degrees Celcius. Subtle Branding.
100% Polyester. With multi usable packing backpack.
(XL + top case cover has extra compartment that can be zipped open to make room for top case)
4-Way super stretch material. Reinforced bottom. Available in Green-Black and Red-Black
Bike cover made from breathable heavy-duty non-woven ripstop material. Kawasaki specific with green honeycomb design elements Easy reach lock buckle. 100% Polyester. With multi usable storage bag.
Trailer hitch / Hitchball / Towball for Europe.Ball diameter: 50mm Shaft: 24 mmThread: 20 mm diameter.Static load: 150 kg / 330 PoundAxle load/Total trailer weight: 2.000 kg / 4.409 Pound (please check your vehicle max. towing capacity)ISO 1103 / DIN 74058. (EU approved e1*00-1525)Distance ring included for ATV and MULE SX. No Distance ring required for MULE PRO DX Hitch ball mout (p/n TX750015)
Protect your vehicle during storage with this premium cover:•Durable gray polyester fabric•UV resistant to prevent fading•Features silk screened Kawasaki logos for a O.E.M. appearance
1 adjustable lamp with 12V, 55W, H-3 bulb, bracket, switch, cabling, fuse and fitting kit.
12 Volt DC power socket with cap for fitment to the dashboard panel. Will plug directly to the cable harness of the bike. (Not needed for Ninja H2 SX SE (ZX1002B. / ZXT02B.) as this bike is standard equipped with 12V outlet.)
Stylish grip heater with all around heating and integrated control button with light in the grip itself. There is an automatic battery saver function. If the battery voltage drops while using the grip heater, the grip heater turns off and the indicator light blinks. The grips feature 3 temperature levels (100%, 60%, 20%, Off). (Not needed for Ninja H2 SX SE (ZX1002B. / ZXT02B.) as this bike is standard equipped with heated grips.)
Warn Winch includes roller fairlead and mechanical brake for blade use. Ergonomic freewheel clutch handle. Sealed all metal drive train and housing. Mini-rocker switch, Handheld remote switch, Includes roller fairlead.For some vehicles, winch mount may be necessary.
Mounts behind front bumper. Heavy-duty steel constructionWarn (4 bolt) & Old Style Superwinch (2 bolt)
This durable winch mount installs behind front bumper and is made of durable steel construction. Accommodates all Warn ATV winches. Includes fairlead mount. Required for installation of any Warn winch to KVF650.
Includes roller fairlead and mechanical brake for blade use. Ergonomic freewheel clutch handle. Sealed all metal drive train and housing.For some vehicles, winch mounts may be necessary.Mule 4010 requires: KAF40-014Mule 600+610 requries: KAF600-020+32190-0639+KAF600-021Brute force 750 (MY 12-16) requires: K99994-0318Brute force 650 (MY 11-13) requires: K11054-1632Brute force 750 (MY 08-11) requires: K11054-1632Brute force 650 (MY 05-13) requires: BF650-001
WARN® ProVantage™ winches feature a powerful permanent magnet motor, a smooth efficient three-stage planetary gear train, metal gear housing, an easy-to-use clutch control dial, fully sealed to keep the elements out, a patented roller disc brake for excellent control while winching, and a corrosion-resistant black powder-coated finish with a unique black hook and tie rods-2.040 Kg (4,500 lbs) capacity-139,7 cm (55’) of 7/32” wire rope (the longest in the lineup) and plow roller fairlead-Pre cut wiring designed to work exclusively with Accessory -Hook, tie rods, and body feature attractive, corrosion-resistant black finish-Three-stage planetary gear train for smooth, efficient operation-Ergonomic clutch handle-Patented roller disc brake for outstanding control-Fully sealed motor and drive train to keep the elements out-Includes illuminated dash-mounted control switch and corded remote-All-metal gear housing and gearsRequires:-Accessory fuse box: KAF080-076 or KAF080-042 - Winch mount: 99940411
1043kg (2300lb) capacity Superwinch with mechanical and dynamic brake and freespooling clutch. Power-in and power-out. 15.2 meter (50') of galvanized wire rope with hook. Sealed Heavy Duty switching relay and handlebar mounted low Amp “toggle” switch.
907kg (2000lb) capacity winch with dynamic brake, self-locking gears and fully sealed motor and drive train. Includes 15m, braided steel wire lead (4mm diameter). A roller fairlead and mini-rocker complete the kit.Requires:-Winch mount (KAF600-020) -Bracket (05-2016) (32190-0639)-Adapter (KAF600-021)
WARN® Vantage™ power sport winches offer class-leading performance, affordability, and a capacity 907 kg (2000 lbs) or 1.814 kg (4,000 lbs). All WARN® Vantage™ winches are available with either durable aircraft-grade wire rope, or lightweight easy-to-handle synthetic rope-The Vantage 4000 has a capacity of 1.814 kg.-139,7 cm (55’) of 7/32 wire rope (the longest in the lineup) and a roller fairlead-Pre cut wiring designed to work exclusively with Accessory Fuse Box (KAF080-076) for the MULE™ PRO-DXT & DX-Fully sealed motor and drive train to keep the elements out-Three-stage planetary gear train for smooth, efficient operation-High-strength composite gear housing and all-metal gears-Mechanical spring brake for control while winching-Includes dash-mounted mini rocker switch and corded remote controlRequires:-Accessory fuse box: KAF080-076 or KAF080-042- Winch mount: 99940411
Protect yourself from the elements with this inner fender kit designed to offer additional protection from mud and water. Contains left and right inner fenders and all required hardware.
Protection for front bumper and headlight area. Durable steel construction with textured black powdercoating.
Heavy duty construction, aluminum material, uses original mounting points. Helps protect frame in rough terrain.
Heavy-duty, lightweight aluminum construction, utilizes the stock mounting points. Helps protect frame in rough terrain.
Heavy duty construction, aluminum material, uses original mounting points. Helps protect frame in rough terrain.
Helps protect CV joint boots and A-arms in rough terrain. Brushed aluminum construction, Helps get you over obstacles, Utilises stock mount points and includes all necessary mounting hardware.
Helps protect frame in rough terrain. Helps get you over obstacles, brushed aluminum construction, utilises stock mount points, and includes all necessary mounting hardware.
Heavy-duty, lightweight aluminum construction, replaces stock plastic covers. Utilizes the stock mounting points. Helps protect frame in rough terrain.
Helps protect frame in rough terrain. Helps get you over obstacles, brushed aluminum construction, utilises stock mount points and includes all necessary mounting hardware.
Helps protect CV joint boots and A-arms in rough terrain. Brushed aluminum construction, helps get you over obstacles, utilises stock mount points and includes all necessary mounting hardware.
Heavy-duty, lightweight aluminum construction, utilizes the stock mounting points. Helps protect frame in rough terrain.
Hard cabin to challenge the elements! Structure made of high grade steel with quality black finish. Flip-up tinted single layer safety glass windscreen with rubber seals and locks. The doors are equipped with hydraulic stoppers, automotive style locks. Available in packages and as modular parts. PACKAGES: 022CAT0110: Hard Cabin complete kit for MX with heater Includes: Glass windscreen + steel roof + ABS with Polycarbonate (PC) Rear Panel + PC doors + Wiper and washer kit + Heater kit 022CAT0111: Hard Cabin kit for MX without heater Includes: Glass windscreen + Wiper and washer kit + steel roof + ABS with Polycarbonate (PC) Rear Panel + PC doors 022CAT0112: Half Cabin for MX Includes: Glass windscreen + Wiper and washer kit + steel roof + ABS with Polycarbonate (PC) Rear Panel 022CAT0113: Cabin roof with windscreen for MX Includes: Glass windscreen + Wiper and washer kit + steel roof MODULAR PARTS: 022CAT0114: Windscreen+ Wiper+ Washer 022CAT0115: Steel Roof Panel 022CAT0116: Rear Panel 022CAT0117: Wiper set 022CAT0118: Washer set 022CAT0119: Heater set (accessory fuse kit recommended) 022CAT0120: Door set Recommended are the accessory heavy duty springs
All around plastic covering with soft doors and rear window for use in conjunction with Basic Cab Kit (022CAT0012) Mounts to original frame. Doors roll vertically and horizontally.
Extra grip and reduced wear on the cabin floor. 1-piece. Tough resilient rubber protects feet and Mule floorboards. 8mm(5/16") thick rubber reduces sound levels. MULE logo in center of mat.
Air capacity 112 cu.m, heater capacity rating 2351Kcal/h, two stage blower, 12V, heat exchanger, water hoses, stopcock, movable nozzles, 12V switch with control light and cable, installs in the instrument panel.
Keep your ATV protected when it's not in use with this water and mildew resistant cover that features zippered gas tank access, an adjustable cinch strap, and openings in both the front and rear for tie-downs. Dual security straps under ATV will keep this cover securely fastened. Fits with rack extensions.
Air capacity 112 cu.m, heater capacity rating 2351Kcal/h, two stage blower, 12V, heat exchanger, water hoses, stopcock, movable nozzles, 12V switch with control light and cable, installs in the instrument panel. (Suitable for petrol model only)
Uses original frame. Contains: Flip-up tinted single layer safety glass windscreen with rubber seals and locks. Electric wiper system with control light. Roof made of steel sheet, supports, front valance (PVC material) and brackets. ROPS approved.
Durable, weatherproof 18 oz. fiber-reinforced PVC laminate material. Installs easily with durable straps. Includes fiberglass support rod to shape peak. Large, UV-resistant, vinyl rear window extends behind uprights to bottom of seat for added coverage. Produced from nylon reinforced rip-stop vinyl.•Not to be used with windscreen from hard cabin•Remove for towing or use an enclosed trailer when transporting a vehicle with a Soft Roof with Back Cover.
High strength Polyethylene material with UV stabilisers to reduce fading. Rubber sealed lid to keep out dust and water. Two lockable latches. Bolts solidly in place. Measures L 860mm x W 460mm x H 180mm. Black.
Prevents cargo from shifting, offers more options for tying down loads, steel construction, matching powder coat paint, max height 152.5mm, front centre height 108mm.
High strength Polyethylene material with UV stabilizers to reduce fading. Rubber sealed lid to keep out dust and water with two lockable latches. Bolts solidly in place. Size L 1010mm x W 480mm x H 300mm. Black.
Plastic liner to reduce damage to original bed surface. Notches provided to make compartments in the bed. Matching cover for the tailgate supplied.
Plastic liner to reduce damage to original bed surface. Notches provided to make compartments in the bed. Matching cover for the tailgate supplied.
Full coverage protects entire front end above bumper. Headlight protection, steel tube construction.
Universal strong waterproof and UV resistant luggage roll.Retroreflective details for increased safety.Attachment on 4-points. Including shoulder strap and address card pocket. Size: 35 l (Ø30 cm, Length 55cm)
Vacu-Hold Jet Ski Cover. Vacuum-vented trailering system with Lower front hull section that protects the front of the craft. Ultra-Violet, mildew-resistant. Water repellent. Constructed of Sur Last solution dyed polyester.
The new Buoyancy Aid is developed by Jobe Sports International and Kawasaki Motors Europe. The (swim) vest is made of soft neoprene fabric with additional foam panels to provide maximum comfort. The design is made to match modern Jet Ski PWC and fits both men and women. Available in size S to XXL. The stretch material ensures a tight fit and maximum mobility compared to Nylon vests. Conveniently a size chart is printed inside each vest. Specifications: -Equipped with a D-ring to attach to the emergency cord. -50 N Floating capacity. -ISO-certified and CE-approved. Size chart - Chest diameter (cm): S: 80-90 M: 90-100 L: 100-110 XL: 110-120 XXL: 120-130
The new Buoyancy Aid is developed by Lankhorst-Taselaar and Kawasaki Motors Europe. The (swim) vest is made of soft neoprene fabric with additional foam panels to provide maximum comfort. The design is made to match modern Jet Ski PWC and fits both men and women. Available in size XS to XXXL. The stretch material ensures a tight fit and maximum mobility compared to Nylon vests. Conveniently a size chart is printed inside each vest. Specifications: -Equipped with a D-ring to attach to the emergency cord. -50 N Floating capacity. -ISO-certified and CE-approved. Size chart - Chest diameter (cm): XS: 82-88 S: 88-95 M: 95-101 L: 101-107 XL: 107-114 XXL: 114-120 XXXL: 120-127
This Jet Ski Fender can be attached to the front, rear, port and starboard. Simply attach the bottom underneath the bond line, use the hook and strap it on. The strap is adjustable and has a rubber block to prevent scratching the paint. The water repellent fender contains two foam pads to absorb the bumps against (floating) docks. Can be folded for easy storage.
Alloy plate to give a strong and secure fitment of the RAM-HOL-GA40U cradle. This will allow fitment of Garmin GPSMAP 78 series navigation systems.(Kawasaki Jet Ski Ultra 300 LX, JT1500J..)
Lightweight CNC machined triple clamp set. 3-positions for handlebar clamps. Adjustable offset 21-23mm. (Original = 23mm) Used by our Kawasaki racing teams in MX. Shock absorbing (PHDS) holder sets for 28.6mm fatbar or 22mm standard diameter handlebars must be ordered separately.
Aluminium hand pump with flex connector and a 0-20 bar (0-300 psi) accurate digital LCD gauge for adjusting air forks and air shocks. With micro adjust air bleeder button and 'Schrader' valve connection. Auto shut-off after 80 seconds. With CE marking.(Usage example: KX450F with Air front fork, VN1700 rear shocks)(PSF, SFF-Air TAC)
Brushed aluminium rear muffler with stainless steel intake tube Long body design for Jr. FIM sound regulations.
Used by all major factory teams and riders improving clutch performance, heat dissipation and durability. 459 gram.
Tapered handlebar for use with 28.6mm (1 1/8") Fatbar clamps or XTRIG triple clamps. Shot-peened and black anodised corrosion resistant finish. Weight 636gram, Width 810mm, Centre 28.6mm diameter, ends 22.2mm diameter. (TUV 6133)
The optional KX FI Calibration Kit allows adjustment of engine characteristics by using one of the pre-set maps included in the software or by adjusting the map to suit rider preference. In addition to the kit, a computer and 12 V battery are also required.
Dual density, black/green racing handgrips. Ribbed soft gel outer provides extra comfort and grip. 22-25mm diameter, 115 mm length.
Triple density, triple colour. 22-25mm diameter, 115 mm length. Strong inner sleeve minimizes grip movement. Medium density mid section with soft gel outer provides extra comfort.
The optional KX FI tuning (calibration) kit allows adjustment of engine characteristics by using one of the pre-set maps included in the software or by adjusting the map to suit rider preference. Data logging function is included. Data can be downloaded from the ECU controller to the PC and it can be displayed as graphical data for analysis, and comparison with other riding data.In addition to the kit, lead (26011-0243), a computer and 12 V battery are also required. Additional plugs are available to quickly change pre-set engine mappings. (Windows XP 64-bit, Windows Vista 64-bit, Windows 7-starter, Windows 8 32-bit and Windows 8 64-bit are not supported) 2014 model KX450F (KX450FEF) + KX250F (KX250ZEF)
Ti-6 titanium racing exhaust system for improved performance.Pro circuit exhaust similar to the system used on the MX1 KX450F bikes.Full system with titanium head pipe, mid pipe and canister and carbon end cap. Machined aluminum muffler bracket for increased strength and durability.Precision welded pipe with resonance chamber. Passes AMA/FIM sound regulations.
The optional KX FI Calibration Kit allows adjustment of engine characteristics by using one of the pre-set maps included in the software or by adjusting the map to suit rider preference. In addition to the kit, warning lamp (23016-0049), bracket (11055-1673), lead (26011-0246), a computer and 12 V battery are also required.2011 models KX250F/KX450F.For use it with 2009 or 2010 models of KX450F additional parts are required: 1x 26011-0243, Controller Sub-harness, 1x 11055-1587, Controller Bracket
Tapered Neken handlebar for use with 28.6mm (1 1/8") Fatbar clamps or XTRIG triple clamps. Including pad.Handlebar weight 620gram, Width 815mm, Height 115mm, Reach 75mm. Centre 28.6mm diameter, ends 22.2mm diameter.
Alloy inner hub and pressure plate kit. Used by all major factory teams and riders improving clutch performance, heat dissipation and durability.
CNC machined clutch cover as seen on bikes in our MX2 Racing Team. Provides extra strength, lower weight and improved looks. 217 gram.
Lightweight carbon lower engine guard with side protection. Helps to protect the lower frame and crankcase.
Lightweight full exhaust system with stainless steel tubes and a titanium muffler. The exhaust system meets FIM noise limits. It features a durable welded bracket and titanium end cap.
The optional KX FI Calibration kit allows adjustment of engine characteristics by using one of the pre-set maps included in the software or by adjusting the map to suit rider preference. Data logging function is included. Data can be downloaded from the ECU controller to the PC and it can be displayed as graphical data for analysis, and comparison with other riding data.In addition to the kit, lead (26011-0246), a computer and 12 V battery are also required. Additional plugs are available to quickly change pre-set engine mappings (260110728 black, 260110748 white)2012 model KX450F + KX250FFor 2013 KX450F + KX250F use CD-Rom 41080-0589
Lightweight front disc guard as used by the Kawasaki racing team in Motocross.
Ignition cover and front sprocket guard for KX85. Strong alloy construction with Bud Racing logo. Including alloy chain guard.
The optional KX FI Calibration kit allows adjustment of engine characteristics by using one of the pre-set maps included in the software or by adjusting the map to suit rider preference. Data logging function is included. Data can be downloaded from the ECU controller to the PC and it can be displayed as graphical data for analysis, and comparison with other riding data.In addition to the kit, lead (26011-0243), a computer and 12 V battery are also required. Additional plugs are available to quickly change pre-set engine mappings (260110728 black, 260110748 white)2013 model KX450F + KX250F
Clutch housing as used by all major factory teams and riders improving clutch performance, heat dissipation and durability.
Stainless steel racing exhaust system for improved performance.Machined aluminum muffler bracket for increased strength and durability. Similar to the system used on the MX1 KX450F bikes.
This Hole shot device improves your starts. The loaded fork automatically releases at the first bump. Used and tested successfully in MX racing.
The optional expansion chamber offers increased performance across the whole rpm range. High quality carbon steel construction with reinforced mounting brackets.(2 types of finish available: Works or Nickel plated)
Lightweight front disc guard as used by the Kawasaki racing team in Motocross. Protects the front disc from dirt. (150gr including spacers)
4 support rows provide maximum width for support and traction. Extra length and dual angle for maximum leverage and control. 2 piece set, black steel.
Durable, lightweight aluminum construction, offers additional protection for key components.
Durable, lightweight aluminum construction, offers additional protection for key components.
.jpg)
.jpg)
.jpg)
