Inpage Navigation Section: Overview

Back to Mule

2023

MULE SX 4x4

The MULE SX 4x4 rides on 24 inch tyres and offers selectable 2WD and 4WD with Hi-Lo dual-range transfer case and rear differential lock. Kawasaki PRO styling, tilting steering wheel and the dependable OHV 410cc engine, 181kg load and 500kg towing capacity make this is a true Go-Anywhere vehicle.

Colour

Timberline Green

Edition of MULE SX 4x4

Standard

Inpage Navigation Section: Gallery

Load more images

Show less images

Inpage Navigation Section: Features & Specs

Features
Technologies
Specifications

Rugged Chassis

Highly durable ladder-type tubular steel frame designed for an ideal blend of rigidity and ride comfort.

Storage

Removable front hood allows quick access to a spacious 60-litre sealed storage area. The hood releases are on the cab side, allowing access from inside the cab.

Cargo Bed & Towing Capacity

Cargo bed dimensions are 1,040 x 905 x 245 mm. Its square, flat design makes it easy to load from three sides. Cargo bed load capacity is 181 kg

Increased Comfort

Idealised front and rear suspension settings offer the following benefits: - increased stability - improved suspension action, contributing to off-road bump absorption and ground following, as well as increased ride comfort - improved handling response, facilitating control

Simple, Reliable Engine

The MULE SX is powered by a 401 cm3, 4-stroke, OHV, air-cooled engine. Compact, lightweight and durable, the engine is extremely reliable.

Tilt Steering

Steering wheel has a stepless adjustability range of approximately 29o, allowing drivers to set its position to suit their preference, as well as lift it out of the way to facilitate getting in and out of the vehicle

Parking Brake

Pulling the parking brake lever (conveniently located to the left of the driver’s seat) operates a mechanical internal expansion type brakefor the rear wheels.

Ample Range

16-litre fuel tank gives the fuel-efficient MULEs ample operating range. Redesigned fuel tank filler hole makes refuelling much easier.

Compact Size

Overall width is 1,335 mm; length is 2,710 mm. Tread measures 1,055 mm (front) and 1,000 mm (rear). Wheelbase is 1,780 mm.

Tough, rugged styling

Pickup truck style front hood, front grill and headlamp design modelled after the PRO Series MULE flagship models give the MULE SX models a tougher, rugged image like their bigger brethren.

Transmission

Belt-driven automatic transmission with a Hi-Lo dual-range transfer case gives the 4WD models excellent off-road riding capability. Two forward speeds to choose from lend flexibility when hill-climbing with a heavy load.

Automotive Dashboard Design

Automotive-style dashboard designed based on that of the PRO Series models puts all controls within easy reach of the driver.

Rugged Chassis

Highly durable ladder-type tubular steel frame designed for an ideal blend of rigidity and ride comfort.

Storage

Removable front hood allows quick access to a spacious 60-litre sealed storage area. The hood releases are on the cab side, allowing access from inside the cab.

Cargo Bed & Towing Capacity

Cargo bed dimensions are 1,040 x 905 x 245 mm. Its square, flat design makes it easy to load from three sides. Cargo bed load capacity is 181 kg

Increased Comfort

Simple, Reliable Engine

The MULE SX is powered by a 401 cm3, 4-stroke, OHV, air-cooled engine. Compact, lightweight and durable, the engine is extremely reliable.

Tilt Steering

Parking Brake

Pulling the parking brake lever (conveniently located to the left of the driver’s seat) operates a mechanical internal expansion type brakefor the rear wheels.

Ample Range

16-litre fuel tank gives the fuel-efficient MULEs ample operating range. Redesigned fuel tank filler hole makes refuelling much easier.

Compact Size

Overall width is 1,335 mm; length is 2,710 mm. Tread measures 1,055 mm (front) and 1,000 mm (rear). Wheelbase is 1,780 mm.

Tough, rugged styling

Pickup truck style front hood, front grill and headlamp design modelled after the PRO Series MULE flagship models give the MULE SX models a tougher, rugged image like their bigger brethren.

Transmission

Automotive Dashboard Design

Automotive-style dashboard designed based on that of the PRO Series models puts all controls within easy reach of the driver.

SHOW LESS

ERGO-FIT

ERGO-FIT is an interface system that allows a wide range of riders to feel at one with their machine.

ERGO-FIT

ERGO-FIT

ERGO-FIT is an interface system that allows a wide range of riders to feel at one with their machine.

SHOW LESS

Engine

Engine type	Air-cooled, 4-stroke, single-cylinder
Compression ratio	8.6:1
Valve system	OHV, 2 valves
Bore x stroke	82.0 x 76.0 mm
Displacement	401 cm³
Fuel system	Fuel injection
Lubrication	Forced lubrication, wet sump
Starting system	Electric
Ignition system	Battery & Coil (transistorised ignition)

Performance & Transmission

Maximum power	9.9 kW {13.5 PS} / 4,000 rpm
Maximum torque	29.0 N•m {3.0 kgf•m} / 2,400 rpm
Transmission	CVT, 2-speed & reverse, automatic
Primary reduction ratio	3.653 ~ 0.794
Primary drive	Belt drive torque converter (CVT)
Final drive	Shaft 2WD/4WD
Final reduction ratio	4.000 (64/16)

Frame & Dimensions

Frame type	Ladder type, tubular steel
Trail	45 mm
Wheel travel front	78 mm
Wheel travel rear	79 mm
Tyre, front	24 x 9-10
Tyre, rear	24 x 11-10
L x W x H	2,710 x 1,335 x 1,800 mm
Steering angle L R	43° / 38° (43° in - 38° out)
Wheel base	1,780 mm
Ground clearance	170 mm
Fuel capacity	16.0 litres
Seat height	780 mm
Curb mass	468 kg

Brakes & Suspension

Parking brake	Mechanical internal expansion type on rear wheels
Front brake type	Dual hydraulic drums
Rear brake type	Dual hydraulic drums
Front suspension type	MacPherson struts
Rear suspension type	Unit swingarm

Inpage Navigation Section: Accessories

Accessories

Mirrors for SX

Vertical shatter-resistant safety glass mirror sits in high-impact plastic housing. Convex mirror surface increases the driver’s field or rear view. Adaptive 360° bracket rotation provides optimal viewing position. Mirrors attach directly to vehicle ROPS
•Sold as a set of 2

*Can not be combined with hard cabin

SX cargo bed mat

Help protect your cargo bed base with this tough 7,9 mm (5/16”) thick rubber mat. Extra thick rubber helps prevent cargo from sliding. Reduces sound levels caused from vibrations. 6,4 (4/16”) thick black molded rubber, Mule™ in the center of the mat.

Bed liner Mule 600/610/SX

Plastic liner to reduce damage to original bed surface. Matching cover for the tailgate supplied.

Heavy duty spring - rear

Optional coil spring to replace standard spring. Order 2 per vehicle. (Spring rate 24.5 - 44.1N)

Soft top - black

Durable, weatherproof 18 oz. fiber-reinforced PVC laminate material. Installs easily with durable straps. Includes fiberglass support rod to shape peak.
•Not to be used with hard cabin windscreen
•Remove for towing or use an enclosed trailer when transporting a vehicle with a Soft Roof.

Headrest & bracket

The Headrest offers additional occupant comfort

Made from high-density foam with a molded Kawasaki logo
Sold as one individual headrest
MULE SX No Headrest Bracket required
Note: MULE PRO-MX models require Headrest Bracket (99994-1190)

Installation Instructions & Info

Tool mounting system

The Tool Mounting System from Kawasaki is a highly adaptable and practical addition to your vehicle. Designed specifically for the Kawasaki side-by-side models, this system allows you to securely attach a variety of tools to your vehicle. Whether you need to mount additional storage, equipment, or accessories, this versatile system provides a reliable and convenient solution. Its durable construction ensures long-lasting performance, while its easy installation process makes it user-friendly for all levels of experience. Upgrade your vehicle's functionality with the Tool Mounting System and enjoy the freedom to customize your ride according to your specific needs.

Rear View Mirror

3D curved safety glass provides increased field of view

Textured black powder coating
Cast aluminium mounting that works with 38.1mm (1.5 inch) to 45mm (1 7/8 inch) diameter tubes
273mm (10 3/4 inch) L x 89mm (3.5 inch) H

Installation Instructions & Info